Welltech FXSO Gateway In SIP V.1.2 - Manual (Page 73)

FXSO SIP Gateway User Manual Document Ver.: 102
Released Dec., 2004
71
-line the line number, which you want to define the security info
-name the name is as same as the SIP number.
-password the password for the authentication if it is the necessary for
the proxy.
4.2.13 [line]
This command is for configure each line parameters of Gateway.
----------------------------------------------------------------------------------------------
usr/config$ line
Gateway line information and configuration
Usage:
line -config number [hunt number][hotline number][forward number]
line -print Gateway line information.
hunt Hunting group.
hotline Hot line configuration.
fwdtype forward type for FXS line.
To IP:
0:disable
1:un condition
2:busy
3:no answer:
To Local:
0:disable
3:no answer
forward forward for FXS line.
Example:
line -config 1 hunt 1 hotline 1003 forward 1002
usr/config$
Parameter Usages:
-print print out all current settings of line
-config determine which line to configure
-hunt set hunting group flag of each line. User can assign different
hunt group number represent different hunt group. For
example, if user assigns FXS TEL1 as hunt group 1, and FXS