Westermo EDW-120 - Manual (Page 17)

17 6616-2211
Restore Factory default settings
Note! This will clear your customized settings.
The factory default settings can be restored using DIP-switch S1:2.
1. Force this to ‘On’ and Power-up the EDW-120 for at least 5 seconds.
2. Force the DIP-switch to ‘Off’ and power cycle the EDW-120.
The EDW-120 now contains the factory default settings.
Note ! If the default address of the unit is valid on the connected network it is possible
to access the unit directly from a browser.
ON
1 2 3 4 5 6 7 8