Westermo MRD-315 - Manual (Page 25)

25 6623-2250
Basic Configuration
The three sections below detail the steps needed to configure the MRD for basic packet
mode functionality. For details on how to configure the unit for Circuit Switched mode
and for more advanced configuration refer to the Advanced Configuration section of the
Reference Guide.
Configure the Wireless interface
To access the configuration page for the Wireless interface, click on Wireless. The Basic
Wireless configuration page will be displayed as shown in Figure 4.
Figure 4
Network Configuration
The ”Network Configuration”section contains the settings for the operational mode and
the frequency band of the unit, the default settings will usually be adequate to connect
the MRD to a packet based network.
Setting the SIM card PIN
The SIM card may have a PIN associated with it and may require the PIN to be entered
before the unit can access the SIM. To set the SIM PIN click Setup. A dialog box as shown
in Figure 5 will be displayed.
Figure 5
Set the field marked ”Enter when requested” to ”Yes” and enter the PIN in the ”New
PIN” and ”Confirm PIN” entry boxes. Then click the ”Set” button to save the PIN.
Click ”Set”
to complete
Set to ”Yes”
Enter PIN in both
text boxes