Westermo MRD-315 - Manual (Page 28)

28 6623-2250
Enable the Wireless Connection
To complete the configuration of the wireless connection, set the ”Connection state” to
”Always connect” and click the ”Update” button to save the changes. Once the changes
have been set, the MRD will initiate a connection. Normally it will take up to 30 seconds
to esablish a connection. Figure 8 shows the completed wireless configuration.
Figure 8
Checking the Status of the Connection
To check the status of the connection select ”Status” from the top level menu and then
select ”Wireless” from the second level menu. The Wireless status page will be displayed
which will look similar to the one shown in Figure 9. The status of the connection will
change as the router connects to the network, first it will report ”Checking” then
”Connecting” and finally ”Connected”. To see the value changing the page will need to be
reloaded.
Figure 9