ZeeVee ZvSync (DVB-T/C) - Manual (Page 15)

ZvSync-EU User ’s Manual
|
Page 15
2.4 INFRARED REMOTE CONTROL RECEIVER
The Zvsync-eU receiver/decoder is supplied with an external IR receiver.
This is in the form of a cable with an IR receiver at the end.
The pigtail MUST be installed for the ZvSync to receive commands from the
remote and is required for proper operation.
By separating the infrared receiver from the base unit, the main body of the
ZvSync receiver/decoder can be installed in an unobtrusive location with
only the IR sensor showing.
Connecting to ZvSync
The 3.5mm plug on the infrared pigtail must be plugged in to the front “IR”
port on the ZvSync main unit for proper operation.