ACTi Indoor PTZ on Hard Ceiling with Pendant Mount - Manual (Page 3)

www.acti.com
Installation Guide
3
Installation Procedures
In case of high ceilings, the camera can be lowered by pendant mount.
Mounting Solution Cabling Solution
Must Drill a Hole
on the Ceiling
Straight Tube
(SMAX-0052)
Use this configuration if the
cable can directly enter the
ceiling.
Yes
PMAX-0102 PMAX-0110
Straight Tube with
Bracket
(SMAX-0053)
Use this configuration if the
cable cannot directly enter the
ceiling and must go along the
ceiling.
No
PMAX-0103 PMAX-0110
NOTE: The accessories are not included in the camera package. Contact your sales agents to
purchase.
Prepare the following:

Pendant Mount with Mount Kit ( SMAX-0052 or SMAX-0054 )

Mounting Screws (included in the mount kit package)

Network Extension Cable (included in the PMAX-0110 kit)

Screwdriver (not included)