ACTi Indoor PTZ on Hard Ceiling with Pendant Mount - Manual (Page 4)

www.acti.com
Installation Guide
4
Step 1: Install the Straight Tube
1. Use the drill template (included in the straight tube package) to mark and drill the mounting
holes on the ceiling.
2. Insert the power adaptor, network cable, and other necessary cables (if any) to pass through
the straight tube. Note that you must insert the power adaptor cable first to fit the tube.
NOTE:

If using a straight tube without bracket, route the cables to pass through the hole on
the ceiling.

The following illustrations show the installation using a straight tube with bracket.
3. Install the straight tube on the ceiling.
NOTE: If the straight tube is not long enough, you may use one or more extension tubes
(purchased separately).