ACTi KCM-3311 - Manual (Page 8)

www.acti.com
Hardware Manual
8
Installation
The camera can be directly installed on walls or mounted in the ceilings using mounting kits.
This section describes the two basic ways that you can do to install the camera.
NOTE: Due to continuous product improvements, the camera images on this documentation may
slightly differ from the actual camera that you received. Installation procedures remain the same.
Method 1: Surface Installation
You may directly drill holes on the wall or the ceiling and directly install the camera on a surface.
To do this, follow the procedures below:
1) Drill the holes
Using the supplied drill template in the camera package, mark the holes on the wall / ceiling and
drill the holes.
2) Remove the cover
Remove the dome cover by unscrewing the three attachments