Setup, Pre-requisites – ACTi Mobile Client for iOS User Manual
Page 4
ACTi Mobile Client for iOS V1.0.17
Setup
Pre-requisites
Before using
ACTi Mobile Client
, please make sure pre-requisites below are fulfilled:
1.
Your server site (software NVR servers, CMS servers or standalone NVR servers) or
camera firmware has been upgraded to the latest compatible versions.
Please go t
compatible version information
2.
Your iOS device (iPad, iPhone and iPod touch) has been upgrade to iOS 7.0 or later.
3.
To enable optical PTZ functions, preset points or video motion alerts on
ACTi Mobile
Client
, please make sure you have properly configured and tested the related
functions via CMS/NVR/ Standalone NVR/ camera firmware interface; to observe DI
status or enable Manual DO Trigger buttons, please connect well the devices with the
camera.