Connect the devices – ACTi INR-410 INR-420 V3.0.09 User Manual
Page 21
INR-410/420 System Administrator’s Manual
Connect the Devices
Follow the procedures to connect the devices. These devices are supposed to get connected
in the sequence shown below.
Step
Description
Connect the monitor to INR.
(Local display can support up to 2 different ports at the same time, e.g.HDMI x 2 or
HDMI + VGA)
Connect the USB keyboard and mouse to INR.
Finish setting up your eSATA storage device if needed (e.g. RAID configuration for
multiple disks), connect it to INR and power it on. INR will recognize it as a normal
single hard disk.
Connect the network switch to INR via one of the LAN ports.
Plug the power adapter into INR and electricity outlet.
Connect INR to the Internet if remote management via the Internet is required.
6
Internet
Tip
INR supports iSCSI NAS. For detailed information on how to use iSCSI NAS with INR, please
refer to our article introducing