ACTi Edge Recorder Client for Windows V1.0.03 User Manual
Page 26
ACTi Edge Recorder User’s Manual
Delete a Device
To delete an existing device from Device List
, select it and click “X”
Configure Camera Basic Settings
On Basic Setup section, you may watch the live view of the device and
change its connection basic settings.
To configure advanced camera settings, you may click “Web
Configurator
” to enter the device’s firmware interface.
It is also recommended that you cli
ck “Get Device Settings” on ERC
after you have changed any setting on camera’s firmware.
Field Name
Description
Device Name
Enter the name of the camera, which will be shown in the Device List.
This name should be descriptive so that you know where the camera
is located. The name you input here will not change the setting on the
device’s firmware.
Protocol
Select a streaming protocol to communicate with the camera.
IP Address
Enter the camera’s IP address or host name.
Basic Setup