Epic Fitness EPSY5015.0 - Manual (Page 15)

15
22. Apply grease to an M10 x 70mm Bolt (57). Attach
a Press Arm Handle (27) to the Left Press Arm
(25) with the Bolt and an M10 Nylon Locknut
(111).
Do not overtighten the Nylon Locknut;
the Press Arm Handle must be able to pivot
easily.
Repeat this step with the other Press Arm
Handle (27) and the Right Press Arm (26).
24. Apply grease to an M10 x 75mm Bolt (96). Attach
the Leg Press Plate (29) and a 2 3/4" Bushing
(65) to the Leg Press (12) with the Bolt and an
M10 Nylon Locknut (111).
Do not overtighten the
Nylon Locknut; the Leg Press Plate must be
able to pivot easily.
25. During steps 25–54, see the CABLE DIA-
GRAMS on pages 29 and 30 to identify the
cables and ensure proper cable routing.
Identify the Butterfly Cable (73). Attach the
Cable to the Right Upright (7) with an M8 x 25mm
Shoulder Bolt (92) and an M8 Nylon Locknut
(101).
Make sure that the Cable end can pivot
easily around the shoulder of the Bolt.
23. Apply grease to a 2 3/4" Bushing (65). Orient the
Leg Press (12) with the welded spacer on the indi-
cated side. Attach the Leg Press and the Bushing
to the Left Base (2) with an M10 x 95mm Bolt
(108) and an M10 Nylon Locknut (111).
111
22
23
25
27
27
26
12
2
111
108
65
Grease
96
29
12
24
25
92
73
7
101
57
Grease
Grease
111
Cable Assembly
Welded
Spacer