Epic Fitness EPSY5015.0 - Manual (Page 17)

17
30. Wrap the Butterfly Cable (73) over a Pulley (43).
Attach the Pulley to the Right Top Frame (3) with
an M10 x 40mm Bolt (116) and an M10 Nylon
Locknut (111).
Repeat this step with another Pulley (43).
32. Wrap the Butterfly Cable (73) over a Pulley (43).
Attach the Pulley to the Right Top Frame (3) with
an M10 x 45mm Bolt (95) and an M10 Nylon
Locknut (111).
33. Wrap the Butterfly Cable (73) over a Pulley (43).
Attach the Pulley to the Center Top Frame (6)
with an M10 x 45mm Bolt (95) and an M10 Nylon
Locknut (111).
31. Wrap the Butterfly Cable (73) under a Pulley (43).
Attach the Pulley, a Cable Trap (48), and two Half
Finger Guards (46) at the second hole from the
top of the two Pulley Plates (49) with an M10 x
50mm Bolt (106) and an M10 Nylon Locknut
(111).
Makes sure that the Cable Trap is orient-
ed to hold the Cable in the groove of the
Pulley.
116
3
111
43
73
43
30
31
111
46
49
48
46
43
106
73
49
3
95
111
43
73
32
33
111
95
43
6
73