Epic Fitness EPSY5015.0 - Manual (Page 18)

18
34. Attach the Butterfly Cable (73) and a Weight Cap
(67) to the indicated Weight Tube (75) with an
M10 x 50mm Bolt (106) and an M10 Nylon
Locknut (111).
36. Attach a Pulley (43) inside the Curl Post Upright
(10), over the Low Cable (70), with an M10 x
65mm Bolt (110), two M10 Washers (109), two
1/2" Spacers (68), and an M10 Nylon Locknut
(111).
37. Route the Low Cable (70) through the Right Seat
Upright (11) and the Right Upright (7) and under a
Pulley (43). Attach the Pulley, an M10 Washer
(109), and two Half Finger Guards (46) to the
Right Base (1) with an M10 x 45mm Bolt (95) and
an M10 Nylon Locknut (111).
35. Identify the Low Cable (70). Route the Cable
through the Leg Lever (15) and the Curl Post
Upright (10).
Attach a Pulley (43) to the Leg Lever (15), over
the Low Cable (70), with an M10 x 45mm Bolt
(95) and an M10 Nylon Locknut (111).
73
67
111
106
75
34
35
70
111
95
43
15
10
70
43
10
68
68
109
109
110
111
36
37
11 70
109
46
95
43
7
1
111
46