Elo TouchSystems CRT Touchmonitors - Manual (Page 10)

Connecting Your 17” Monitor
Elo Entuitive Touchmonitor CRT User Guide - 5
Removing the Base
With a screwdriver, press down the lock then remove the
base by lifting it up in the direction of the arrow in the
above illustration.
Connecting Your 17” Monitor
IMPORTANT: Before connecting the cables to your touchmonitor
and PC, be sure that the computer and touchmonitor are turned off.
1. Connect the VGA cable to the video connector on your PC.
Secure the cable to your PC by turning the screws on the con-
nector.
Tethered VGA cable
AC power Serial (RS-232)
USB (on USB models)