Elo TouchSystems CRT Touchmonitors - Manual (Page 39)

Appendix C : Technical Specifications
34 - Elo Entuitive Touchmonitor CRT User Guide
Touchmonitor Specifications
Picture Tube 17” (16” diagonal viewable
image) flat square tube (FST)
with enhanced contrast, dark-
tinted CRT, 0.28-mm dot pitch,
invar shadow mask, advanced
anti-reflection, and anti-glare. 15” (13.8” diagonal viewable
image) flat square tube (FST)
with enhanced contrast, dark-
tinted CRT, 0.28-mm dot pitch,
invar shadow mask, advanced
anti-reflection, and anti-glare.
Maximum
Resolution 1280 x 1024 @ 60Hz 1280 x 1024 @ 60Hz
Deflection Frequency Horizontal: 30-70 kHz
Vertical: 50-160 Hz
Horizontal: 30-69 kHz
Vertical: 50-125 Hz
Maximum Video
Input Bandwidth 108 MHz 108 MHz
Display Area* Factory Setting:
approx. 300 mm x 225 mm
Active Area:
approx. 325 mm x 242 mm
Factory Setting:
approx. 260 mm x 195 mm
Active Area:
approx. 278 mm x 209 mm
Input Signal Video: Analog 0.7 V
Sync: Digital 3.3 V
Video: Analog 0.7 V
Sync: Digital 3.3 V
Input Connector 15-pin D-sub type 15-pin D-sub type
Display Colors* Analog input; unlimited colors Analog input; unlimited colors
Power Source 90-264 Vac (full range) 90-264 Vac (full range)
Power Consumption 90 watts (maximum) 110 watts (maximum)
Power Management Compliant with EPA/Energy
Star, NUTEK/TCO VESA
DPMS signaling method. Compliant with EPA/Energy
Star, VESA DPMS signaling
method.
Plug and Play
Compatibility Compliant with VESA DDC 1
and 2B standards. Compliant with VESA DDC 1
and 2B standards.
CRT Life Average operational CRT life is
12,000 hours to half brightness. Average operational CRT life is
12,000 hours to half brightness.
17” Monitor 15” Monitor
*Dependent on video controller/card used.