Elo TouchSystems CRT Touchmonitors - Manual (Page 12)

Connecting Your 15” Monitor
Elo Entuitive Touchmonitor CRT User Guide - 7
Connecting Your 15” Monitor
IMPORTANT: Before connecting the cables to your touchmonitor
and PC, be sure that the computer and touchmonitor are turned off.
1. Connect the VGA cable to the video connector on your PC.
Secure the cable to your PC by turning the screws on the con-
nector.
2. Connect the power cord to the AC connector on your touchmon-
itor. To protect your equipment against risk of damage from
electrical surges in the power line, plug the touchmonitor’s
power cord into a surge protector, and then connect the power
strip to a grounded (three-pronged) AC electrical outlet.
3. Connect the touchscreen cable. Determine if you have RS-232
or USB. Connect one end to the appropriate port on the back of
your PC. Connect the other end of the cable to the touchscreen
connector on your touchmonitor. The touchscreen cable connec-
tors should fit snugly into the connectors on your touchmonitor
and PC.
4. The USB external hub is a central location for USB connections.
If you have this option, plug the hub into the external hub port.
USB models
(Male port if
no connector)
AC power Serial (RS-232 models)
Tethered VGA Connector for optional
USB external hub
cable