Alinco DJ-V57 - Manual (Page 43)

7.Special Functions
7
43
This function allows to transmit without using the PTT by simply speaking into the
microphone. When you have stopped speaking, the unit will return to receive.
1. Press the FUNC key and while is displayed on the LCD, press the key to
display the VOX setting.
2. Rotate the dial to select the using microphone.
3. Adjust the VOX sensitivity level. Press the key.
4. Rotate the dial and adjust for the volume of your voice when transmitting.
The VOX sensitivity can be set from 1 (low) to 7 (high). When the VOX sensitivity
is set to 0, the VOX function is disabled.
5. Press any key other than the MONI key, PTT key and key to finish setting.
1. Press the FUNC key and while is displayed on the LCD, press the key.
2. Alert signal is transmitted for 5 seconds, and the sound is emitted from the speaker.
3. The alarm stops if any key is pressed.
• An alarm-tone feature is useful to attract monitoring stations attentions.
ALERT 7.4
VO-OFF VO-IN VO-OUT VO-OFF : VOX function OFF
VO-IN : Internal mic
VO-OUT : Option mic
VOX 7.3
NOTE:
• When the sensitivity is raised too high, there may be cases when quieter voices
and/or nearby sounds are unintentionally transmitted.
• When the VOX is active, you can't transmit using the PTT key.
• Even when the sensitivity is properly adjusted, there may be cases when the
radio transmits when there are loud sounds nearby.
• When the VOX feature is active, you can't transmit tone calls, DTMF or auto-
dials.
• During VOX, the 100MHz decimal point (
•
) on the frequency display flashes.