Amer Networks SS2GD8IP - Manual (Page 114)

Publication date:Dec., 2010
Revision B1 102
Function name:
Communities
Function description:
This function is used to configure SNMPv3 communities. The Community and
UserName is unique. To create a new community account, please check <Add new
community> button, and enter the account information then check <Save>. Max
Group Number : 4.
Fig. 3-63-1 SNMPv3 Commuities Configuration
Parameters description:
Delete:
Check <Delete> entry then check <Save> button, the entry will be delete.
Community:
The term here is used for The length of “Community” setting and string is
restricted to 1-32.
UserName:
The term here is used for the UserName setting and access string to
permit acccess to SNMPv3 agent. The length of “UserName” string is
restricted to 1-32.
Source IP:
The term here is used for SNMP access source address setting.
Source Mask:
The term here is used for SNMP access source address mask setting.