Amer Networks SS2GD8IP - Manual (Page 321)

Publication date: Dec., 2010
Revision B1
309
SS2GD8IP(snmp)# set access group1 0 1 gege gege
SS2GD8IP(snmp)#
<<set trap>>
Syntax:
{For SNMPv1/v2c Trap setting}
Usage: set trap <index> <version> <IP> <port> <community/security>
{For SNMPv3 Trap setting}
Usage: set trap <index> <version> <IP> <port> <community/security>
<security level>[<auth> <authpass> <priv> [privpass]]
Description:
The function is used for the SNMP trap setting
Argument:
<index> : available from 1 to 6.
<version> : 1(v1), 2(v2c), 3(v3)
<IP> : trap host IP address
<port> : trap port
<community/security> : aBc, max 32 chars
<security_level> : 1(NoAuthNoPriv), 2(AuthNoPriv), 3(AuthPriv)
<auth protocol> : 1(MD5), 2(SHA)
<authpass> : aBc, min 8 chars, max 40 chars
<priv protocol> : 1(DES)
<privpass> : aBc, min 8 chars, max 32 chars
Possible value:
<index> : available from 1 to 6.
<version> : 1(v1), 2(v2c), 3(v3)
<IP> : trap host IP address
<port> : trap port
<community/security> : aBc, max 32 chars
<security_level> : 1(NoAuthNoPriv), 2(AuthNoPriv), 3(AuthPriv)
<auth protocol> : 1(MD5), 2(SHA)
<authpass> : aBc, min 8 chars, max 40 chars
<priv protocol> : 1(DES)
<privpass> : aBc, min 8 chars, max 32 chars.
Example:
SS2GD8IP(snmp)# set trap 2 3 192.168.20.5 512 test 3 1 geegegge 1
gdgsgdgdg
SS2GD8IP(snmp)#
<<set community>>
Syntax:
set user <Community> <user_name> <Source IP> <Source MASK>
Description:
The Set here is used for the setup of get-community, set-community, trap host ip,
host port and trap-community.
Argument:
<Community> syntax: aBc, max 32 chars
<user_name> syntax: aBc, max 32 chars