Amer Networks SS2GD8IP - Manual (Page 305)

Publication date: Dec., 2010
Revision B1
293
Argument:
<port range> syntax : 1,5-7, available from 1 to 8
Possible value:
<port range> : 1 to 8
Example:
SS2GD8IP(port)# set excessive-collision 6-8 restart
SS2GD8IP(port)# show config
Speed/ Flow Maximum Excessive
Port Duplex Control Frame Collision Description a list of
previously run command set priority
---- --------- -------- ------- --------- --------------------------------
DISCAR
2 Auto Disabled 9600 Discard
3 Auto Disabled 9600 Discard salesdepartment
4 Auto Disabled 9600 Discard salesdepartment
5 Auto Disabled 9600 Discard salesdepartment
6 Auto Disabled 9600 Restart salesdepartment
7 Auto Disabled 9600 Restart salesdepartment
8 Auto Disabled 9600 Restart salesdepartment
set flow-control
Syntax:
set flow-control <port-range> <enable|disable>
Description:
To set per-port flow control
Argument:
<port-range>: syntax 1,5-7, available from 1 to 8
Possible value:
<port-range>: 1 ~ 8
Example:
SS2GD8IP(port)# set flow-control 3-8
SS2GD8IP(port)# show config
1 Auto Disabled 9600 Doscard
2 Auto Disabled 9600 Discard
3 Auto Enabled 9600 Discard salesdepartment
4 Auto Enabled 9600 Discard salesdepartment
5 Auto Enabled 9600 Discard salesdepartment
6 Auto Enabled 9600 Restart salesdepartment
7 Auto Enabled 9600 Restart salesdepartment
8 Auto Enabled 9600 Restart salesdepartment
set max-frame
Syntax:
set max-frame <port-range> <value>
Description:
To set per-port maximum frame size