ARM Electronics XR&HD480 OSD - Manual (Page 27)

User’s Manual
26
Follow the same setup procedures described in <Network Name
(ESSID)> to specify a secret key.
NOTE: If <64bits> is chosen as option for <Data Encryption
Level>, then 10 hexadecimal digits can be entered; and 26
hexadecimal digits for <128bits>.
- Network Setting
This item is to configure the related settings of the WLAN Network,
including <WLAN DHCP>, <WLAN IP>, <WLAN Netmask>, <WLAN
Gateway> and <WLAN DNS>. Select this item and press ENTER, the
sub-menu displays as below.
Network Setting
WLAN DHCP
WLAN IP
WLAN Netmask
WLAN Gateway
WLAN DNS OFF
192.168.70.100
255.255.255.0
0. 0. 0. 0
0. 0. 0. 0
<WLAN DHCP> allows users to obtain a dynamic IP address from
DHCP server. If users select <ON>, then the remaining items will be
assigned automatically. Alternatively, if <OFF> is selected, users have
to enter the remaining items manually.
NOTE:
The item <LAN Select>, which is under <Network
Setup> menu, should be set to <WLAN>, otherwise, this
submenu <Wireless Network Setup> cannot be accessed.
- Connect
After the above settings have been set completely, move cursor to this
item and select <Yes> to activate a wireless network (if any has been
detected), and <No> to abort.