ARM Electronics NDVR16 - Manual (Page 28)

> MOTION AREA SETUP <
28
WALK ON MODE: Set up single sections one by one mode on(SELECT).
WALK OFF MODE: Set up single sections one by one mode off(CLEAR).
BLOCK ON MODE: Select by BLOCK area mode on(SELECT).
BLOCK OFF MODE: Select by BLOCK area mode off(CLEAR).
ALL ON MODE: Select all area mode on(SELECT).
ALL OFF MODE: Select all area mode off(CLEAR).
****CH01 AREA MASK****
: WALK ON MODE Press numeric to select channel.
Press value change button to change mode. 1.2.3.4: SELECT CHANNEL
:MOVE SURSOR
ENTER: MASK OFF
ESC KEY: QUIT
Press direction button to move sursor.
Press ENTER button to on mask function or off.
Press ESC button to quit.
WALK ON MODE WALK OFF MODE. Press ENTER to clear or select each sections.
BLOCK ON MODE BLOCK OFF MODE. Press ENTER to clear or select sections by block.
ALL ON MODE ALL OFF MODE Press ENTER to clear or select all sections.