Camera control – Eneo HDD-2030PTZ1080 User Manual
Page 25
The NIGHT SHOT option removes the IR cutoff filter of the camera and makes the camera
sensitive to near infrared.
AUTO
Camera goes in to B&W mode at low light.
GLOBAL
Controlled by the keyboard
(NOTE: GLOBAL function operates F2E protocol only)
The operator can enable NIGHT SHOT for all dome cameras at the same time.
If the NIGHT SHOT mode is set to GLOBAL, “999” + ENTER will turn Off the NIGHT SHOT
mode and “888” + ENTER will turn On the NIGHT SHOT mode.
ON
B/W mode
OFF
Color mode
NOTE: AUTO in NIGHT SHOT function is not applied in “MANUAL” mode of AE Control.
ADDITIONAL AE
ADDITIONAL AE SETUP
BLC : OFF
WDR : OFF
DEFOG : OFF
WDR&DEFOG GAIN : --
AE RESPONSE : --
HIGH SENSITIVITY : OFF
EXIT(ESC TO EXIT)
BLC
OFF, ON
WDR
OFF, ON (NOTE: When ON, DEFOG will be disabled.)
DEFOG
OFF, ON (NOTE: When ON, WDR will be disabled.)
WDR&DEFOG GAIN
0 ~ 4
AE RESPONSE
1 ~ 21
HIGH SENSITIVITY
OFF, ON
• CAMERA CONTROL
CAMERA CONROL
CHROMA : 08
CONTRAST : 08
2DNR : 02
3DNR : OFF
AGC LIMIT : 21
DN THRESHOLD : 05
SHADING : OFF
SAVE AND EXIT(ESC TO CANCEL)
CHROMA
0 ~ 15
CONTRAST
0 ~ 15
2DNR
0 ~ 10
3DNR
OFF, ON
AGC LIMIT
0 ~ 21
DN THRESHOLD
0 ~ 10
SHADING
OFF, ON
20