Eneo HDD-2030PTZ1080 - Manual (Page 33)

ORIGIN CHECK
If you find the dome in the wrong position during operation, execute this origin check and the
dome camera will return to the right position after the origin check operation.
ORIGIN CHECK
ARE YOU SURE ?
CANCEL
OK
Pressing 151 + ON keys will execute the origin check.
• FUNCTION RUN
This Function Run menu allows you to execute the function when you use a keyboard or
a DVR without the function keys (Preset. Pattern, Tour and Scan).
FUNCTION RUN SETUP
(CTRL KEY)
PRESET : ---
PATTERN : ---
TOUR : ---
SCAN : ---
HOME
AUTO PAN
ALARM OUT : ----
EXIT(ESC TO EXIT)
1. Select the desired Function by pushing the Joystick up or down.
2. Select the number by twist the Joystick in PRESET, PATTERN, TOUR and SCAN.
3. Press the CTRL or IRIS Open key to execute.
NOTE: To execute the function, you should save the function (PRESET, PATTERN, TOUR
and SCAN) first.
- HOME
Select “HOME” and press the CTRL or IRIS Open key. The dome camera goes to the
default position that it returns to after an assigned period of inactivity passes. The default
position may be a Preset, Tour, Pattern or no action.
- AUTO PAN
You can execute the endless auto pan to turn in one direction continuously by selecting
Auto-Pan.
- ALARM OUT
This function can operate only when the alarm out setup has the time in the alarm menu.
28