Eneo VKC-13140F2810IR - Manual (Page 23)

ULTRA CLEAR RESOLUTION CAMERA
Operating Instructions
23
• DAY/NIGHT : Follows the setting of DAY/NIGHT function.
• OFF : Turns IR LED off.
• FIX : Fixes the brightness of IR LED in any condition.
IR OPTIMIZER SETUP
MODE
IR AREA
LEVEL
IR LED
COLOR NIGHT
IR SHADE COMP
002
RETURN
AUTO
---
DAY/NIGHT
OFF
OFF
SET1
MID
IR LED AUTO
LEVEL MIN
LEVEL MAX 006
RETURN
255
IR SHADE COMP SETUP
PATTERN
POSH
POSV
LEVEL
006
RETURN
255
1-7. IR OPTIMIZER
1-7-1. MODE : AUTO
Reducing the over-saturation is automatically adjusted along with the location of
the subject.
1-7-3. LEVEL (default: 002):
1-7-2. IR AREA :
Sets the IR OPTIMIZER AREA and the function works selected area in
‘CUSTOM preset only.
This function is used to adjust the overall when IR OPTIMIZER is working.
If the LEVEL is too high, the over-saturation could occur.
1-7-4. IR LED: Sets the IR LED ON/OFF controlling
1-7-5. COLOR NIGHT (default: OFF): Displays night video in color.
1-7-6. IR SHADE COMP (default: OFF):
This function is used to compensate
for IR shade of the side area on screen
when IR LED is ON. You can adjust
the shading PATTERN, POSITION
and LEVEL.
If the LEVEL is high, the screen noise
could be increased at the side area.
This function is effective built-in LED models in NIGHT mode only.
If subjects which can cause overexposure are located near the monitored area, you
can adjust IR OPTIMIZER level or area.