Ensemble Designs 6040 Tracking Audio Delay User Manual
Page 18
In the Input menu shown, set the following input parameters:
•
In Source – select from two possible input sources:
•
Digital (AES input, two channels, are used as the input source)
•
Analog (analog inputs are used as the input source)
•
In Mode – select from the following modes:
•
2-Channel (analog reference levels for these two channels may be set
independently)
•
Stereo (analog reference levels for these two channels track each other)
•
Dig. Ref – select from one of three selections as follows:
•
-20 dBFS (analog audio reference is set to -20 dBFS in the digital domain,
the most common standard)
•
-18 dBFS (analog audio reference is set to -18 dBFS in the digital domain,
the new SMPTE and EBU standard)
•
-16 dBFS (analog audio reference is set to -16 dBFS in the digital domain,
the CBC standard)
•
A. 1 In Ref – set the analog audio input channel 1 reference level to between
•
-10 dBu and +8 dBu with the slider arrows. The selected value will appear
in the box to the right of the slider. Click Default to enable the default value
of +4 dBu.
•
A. 2 In Ref – set the analog audio input channel 2 reference level to between
•
-10 dBu and +8 dBu with the slider arrows. The selected value will appear
in the box to the right of the slider. Click Default to enable the default value
of +4 dBu.
Model 6040 Tracking Audio Delay
6040-18