Ensemble Designs 6040 Tracking Audio Delay User Manual
Page 19
The following indicator and error boxes are available in the Input menu:
•
I/P AES – displays information about the input AES signal that is decoded from
the channel status information as one of the following:
•
No audio (signal not present)
•
Pro audio (Professional format, stream contains audio data)
•
Pro non-audio (Professional format, stream contains non-audio data)
•
Cons audio (Consumer format, stream contains audio data)
•
Cons non-audio (Consumer format, stream contains non-audio data)
•
Sampling Freq – displays the sampling frequency of the input signal pair from
one of the following values:
•
48 kHz
•
44.1 kHz
•
32 kHz
•
Non-standard (sampling frequency is not any of the above frequencies)
•
I/P Error – one of two colors will display to indicate the AES input status:
•
Black (signal is present)
•
Red (no valid input present)
•
Emph – one of two colors will display to indicate the AES emphasis state:
•
Black (no emphasis detected)
•
Yellow (50/15 µS emphasis detected. If emphasis is detected, the 6040 will
set the emphasis bits on the AES outputs and apply de-emphasis on the
analog outputs.)
Model 6040 Tracking Audio Delay
6040-19