H3C Technologies H3C S6300 Series Switches - Manual (Page 210)

197
• Event-specific variable—Available only for a type of event.
Table 20 shows all system-defined variables.
Table 20 System-defined EAA environment variables by event type
Variable name Description
Any event:
_event_id Event ID.
_event_type Event type.
_event_type_string Event type description.
_event_time Time when the event occurs.
_event_severity Severity level of an event.
CLI:
_cmd Commands that are matched.
Syslog:
_syslog_pattern Log message content.
Hotplug:
_slot ID of the IRF member device where a hot swap event occurs.
Interface:
_ifname Interface name.
SNMP:
_oid OID of the MIB variable where an SNMP operation is performed.
_oid_value Value of the MIB variable.
SNMP_Notification:
_oid OID that is included in the SNMP notification.
Process:
_process_name Process name.
User-defined variables
You can use user-defined variables for all types of events.
User-defined variable names can contain digits, characters, and the underscore sign (_), but their
leading character cannot be the underscore sign.
Configuring a user-defined EAA environment
variable
Configure a user-defined EAA environment variable before you use it in an action.
To configure a user-defined EAA environment variable: