Figure 46, Shown in, Figure 47 – H3C Technologies H3C S5820X Series Switches User Manual
Page 57
Advertising
47
Figure 46 Remove the DC power cord
(1) Press the tabs on the power cord connector with your thumb and
forefinger
(2) Pull the power cord connector out
Figure 47 Remove the power module
(1) Pivot the latch to the right with your thumb
(2) Pull the power module out
CAUTION:
•
Put the removed power module in an antistatic bag.
•
The LSVM1AC650, SVM1DC650, LSVM1AC300, and LSVM1DC300 power modules do not have a
power switch. You do not need to switch on or switch off the power module as described in the
installation and removal procedures in
and
.
Advertising