H3C Technologies H3C S5120 Series Switches - Manual (Page 28)

20
Installing the switch into a 19-inch rack by using
mounting brackets
The S5120-SI Switch Series is shipped with a pair of mounting brackets to fix and support the switch.
Figure 18 shows how to install an S5120-SI into a 19-inch rack.
Figure 18 Install an S5120-SI into a 19-inch rack
Introduction to mounting brackets
Table 14 Mounting brackets for the S5120-SI Switch Series
Model
Mounting
brackets Appearance Mounting
position Description
S5120-20P-SI
S5120-28P-SI
Provided
by default See callout A in
Figure 19
Front or rear part of the
chassis’s side See Figure 20 and
Figure 21
S5120-9P-SI Optional
See callout B in
Figure 19
Front or rear part of the
chassis’s side
See Figure 22 and
Figure 23
S5120-9P-PWR-SI
S5120-9P-HPWR-SI
Optional
See callout D in
Figure 19
Front or rear part of the
chassis’s side See Figure 24 and
Figure 25
S5120-52P-SI
Front or rear part of the
chassis’s side See Figure 26 and
Figure 28
S5120-28P-PWR-SI
Front, center, or rear part of
the chassis’s side
S5120-28P-HPWR-SI
Provided
by default See callout C in
Figure 19
Front, center, or rear part of
the chassis’s side
See Figure 26 ,
Figure 27 , and
Figure 28