Displaying and maintaining cluster management – H3C Technologies H3C S5120 Series Switches User Manual
Page 690
1-18
Follow these steps to configure Web user accounts in batches:
To do…
Use the command…
Remarks
Enter system view
system-view
—
Enter cluster view
cluster
—
Configure Web user accounts
in batches
cluster-local-user user-name
password { cipher | simple }
password
Required
If a cluster is dismissed or the member devices are removed from the whitelist, the configurations of
Web user accounts are still retained.
Displaying and Maintaining Cluster Management
To do…
Use the command…
Remarks
Display NDP configuration
information
display ndp [ interface
interface-list ]
Display NTDP configuration
information
display ntdp
Display the device information
collected through NTDP
display ntdp device-list
[ verbose ]
Display the detailed NTDP
information of a specified
device
display ntdp single-device
mac-address mac-address
Display information of the
cluster to which the current
device belongs
display cluster
Display the standard topology
information
display cluster
base-topology [ mac-address
mac-address | member-id
member-number ]
Display the current blacklist of
the cluster
display cluster black-list
Display the information of
candidate devices
display cluster candidates
[ mac-address mac-address |
verbose ]
Display the current topology
information
display cluster
current-topology
[ mac-address mac-address
[ to-mac-address
mac-address ] | member-id
member-number
[ to-member-id
member-number ] ]
Available in any view