Onfiguring pse power monitoring, Monitoring pd, Configuring poe interface through poe profile – H3C Technologies H3C S5120 Series Switches User Manual
Page 720: Configuring poe profile
1-7
onfiguring PSE Power Monitoring
When the PSE power exceeds or drops below the specified threshold, the system will send trap
message.
Follow these steps to configure a power alarm threshold for the PSE:
To do…
Use the command…
Remarks
Enter system view
system-view
—
Configure a power alarm
threshold for the PSE
poe utilization-threshold
utilization-threshold-value
Optional
80% by default.
Monitoring PD
When a PSE starts or ends supplying power to a PD, the system will send a trap message.
Configuring PoE Interface through PoE Profile
You can configure a PoE interface in either of the following two ways:
z
Using command lines.
z
Using a PoE profile, and applying the PoE profile to the specified PoE interface(s).
When configuring a single PoE interface, you can use command lines; when you configure PoE
interfaces in batches, you can use a PoE profile.
A PoE profile is a collection of configurations, containing multiple PoE features. On large-scale
networks, you can apply a PoE profile to multiple PoE interfaces, and thus these interfaces have the
same PoE features. If the PoE interface connecting to a PD changes to another one, you just need to
apply the PoE profile applied on the originally connected interface to the currently connected interface
instead of reconfiguring the features defined in the PoE profile one by one, thus simplifying the PoE
configurations.
The device supports multiple PoE profiles. You can define PoE configurations based on each PD, save
the configurations for different PDs into different PoE profiles, and apply the PoE profiles to the access
interfaces of PDs accordingly.
Configuring PoE Profile
Follow these steps to configure a PoE profile:
To do…
Use the command…
Remarks
Enter system view
system-view
—
Create a PoE profile, and enter
PoE profile view
poe-profile profile-name [ index ]
Required
Enable PoE for the PoE
interface
poe enable
Required
Disabled by default.
Configure the maximum power
for the PoE interface
poe max-power max-power
Optional
30000 milliwatts by
default.