Figure 80 – H3C Technologies H3C SecPath F5000-A5 Firewall User Manual

Page 117

Advertising
background image

107

Figure 80 Binding cables where they must be bent

•

Route, bind, and attach excess cables for easy, safe maintenance activities and correct operations.

•

Do not tie power cables to slide rails.

•

When you connect a cable to an articulated part, for example, when you connect a grounding
cable to a cabinet door, leave enough slack in cables and make sure they are not stressed from any
movement of the part.

•

Cables must be protected at points where they might rub or come in contact with sharp edges or
heated areas. Use high temperature cables near heat sources.

•

Securely fasten cables and take adequate measures to prevent loose connections.

Figure 81 Securely fastening cables

(1) Flat washer

(2) Spring washer

(3) Nut

•

Fasten heavy or rigid power cables at the connectors to relief stress.

•

Do not use tapping screws to fasten the connecting terminals.

•

Bind together cables that are the same type and routed in the same direction.

Table 36

lists the cable bundling specifications.

(1) (1)(2)

(3)

(1) (1)(2)

(3)

Advertising