H3C Technologies H3C SecPath F5000-S Firewall - Manual (Page 43)

34
Figure 29 Basic configuration wizard—2/6 (basic information)
4. Configure the parameters as described in Table 6 .
Table 6 Configuration items
Item Description
Sysname Enter the system name.
Modify Current User
Password Specify whether to modify the login password of the current user.
To modify the password of the current user, set the new password and the confirm
password, and the two passwords must be identical.
IMPORTANT:
You can modify the password of a user authenticated by local authentication only and
cannot modify that of a user authenticated by remote authentication. If the name of a
user authenticated by local authentication and that of a user authenticated by remote
authentication are duplicated, your modification only takes effect on the user
authenticated by local authentication..
New Password
Confirm Password
Password Encryption
Set the password encryption mode:
• Reversible—The firewall encrypts the user password with a reversible algorithm
and saves the password.
• Irreversible—The firewall encrypts the user password with an irreversible algorithm
and saves the password.
5. Click Next.
The page for configuring service management appears.