H3C Technologies H3C SecPath F5000-S Firewall - Manual (Page 44)

35
Figure 30 Basic configuration wizard—3/6 (service management)
6. Configure the parameters as described in Table 7 .
Table 7 Configuration items
Item Description
FTP
Specify whether to enable FTP on the device.
Disabled by default.
Telnet
Specify whether to enable Telnet on the device.
Disabled by default.
HTTP
Specify whether to enable HTTP on the device, and set the HTTP port number.
Enabled by default.
IMPORTANT:
• If the current user has logged in to the Web interface through HTTP, disabling HTTP
or modifying the HTTP port number will result in disconnection with the device.
Therefore, perform the operation with caution.
• When you modify a port number, make sure the port number is not used by
another service.