Emerson NGA 2000 TO2 - Manual (Page 56)

Instruction Manual
760008-A
September 2001
3-32 Operation Rosemount Analytical Inc. A Division of Emerson Process Management
Model NGA 2000 TO2
TO2 37.50 ppm
Measure Status… Channel Lock… MFG Data
-- Main Menu --
Analyzer basic controls (calibration) & setup…
Analyzer and I/O, expert controls & setup…
System configuration and diagnostics…
Display controls…
Time & Date: 06:34:05 February 01 2000
System tag: Fisher-Rosemount
TO2 37.50 ppm
Measure Back…
-- System Configuration & Diagnostics --
System calibration…
Diagnostic menus…
Load/Save configuration (CMMCA)…
Date and time…
Security codes…
Network module management…
System reset…
System tag: Fisher-Rosemount
Channel
3-7 SYSTEM CONFIGURATION AND DIAG-
NOSTICS
This menu and its submenus provides for
setup of the system parameters for the plat-
form. The menu is accessed from the Main
Menu.
Figure 3-26. System Configuration and Diagnostics
The following is a short overview of the con-
tents of the menus:
System calibration…
Not used in this module
Diagnostic menus…
Control module diagnostics…
Not used in this module
Analyzer module diagnostics…
Software error messages
Loading/saving configuration parame-
ters…
Sending or loading of analyzer configuration
data by the serial interface
Date and time…
Date and time setup of the analyzer
Security codes…
Setup of security codes for the different oper-
ating levels
Network module management…
Not used in this module
System reset…
System reset and re-initializing of the analyzer