Grass Valley 7600REF - Manual (Page 66)

66 7600 SD/HD/MHD-REF — Instruction Manual
Operation
VITC – Lines Menu
There is no Drop entry on the VITC menu when the output in question is
set to PAL mode. However, there is an extra Lines menu option on the VITC
menu to allow control over which line the VITC signal is inserted into as
shown in
Figure 35 . Here Line 1 and Line 2 indicates the first and second
lines in each field which have VITC inserted.
Figure 35. VITC – Line Menu
VITC Within SDI
On the 7600 MHD-REF model with Timecode, an extra menu will appear
in the tree for SDI 1 and SDI 2. The menu in
Figure 36 is essentially the same
as the one for SDI 1 shown in Figure 6 on page 33 .
Figure 36. VITC within SDI Menu