Grass Valley 8943RDA - Manual (Page 73)

Use
this
link
8943RDA/-D/-DFR — Instruction Manual 73
Configuration
8943RDA-DFR Settings Web Page
The Settings web page provides selection of the input operating mode for
CH1 (BNC J10), CH2, (BNC J8), CH3 (Fiber 1 input if present), and CH4
(Fiber 2 input if present).
The input choices are as follows:
• Auto Reclock/Bypass,
• Auto Reclock/Mute,
• 3G 2970M,
• HD 1485M,
• SD 270M,
• Manual Bypass HD/3G, or
• Manual Bypass SD.
For a full description of each of these modes, refer to the Modes summary
in
Input Operating Modes on page 28 .
The Settings web page for the 8943RDA-DFR for all configurations are
shown in the following figures:
• 8943RDA-DFR without optional fiber submodule ( Figure 37 on
page 74 )
• 8943RDA-DFR with optional Dual Transmitter fiber submodule
(
Figure 38 on page 75 )
• 8943RDA-DFR with optional Dual Receiver fiber submodule ( Figure 39
on page 76 )
• 8943RDA-DFR with optional Transceiver fiber submodule ( Figure 40
on page 77 )