The module and allows naming of each input – Grass Valley 8964DEC v.1.0.5 User Manual
Page 31
8964DEC/-FS Instruction Manual
31
Configuration
I/O Config Web Page
) shows the rear input and output con-
nections to the module and allows you to name each input. Type the
desired input name (up to 10 characters) into the corresponding box. The
status of each input is indicated by the color of the display.
Note
Outputs are not monitored in this application.
SNMP trap reporting of each channel input can be enabled or disabled by
selecting or deselecting the corresponding checkbox in the
Reporting
column. The
Reporting
column will appear only when an SNMP monitoring
application such as NetCentral is installed.
Refer to
for an explanation of the color coding
and using an SNMP monitoring application.
Figure 10. 8964DEC I/O Config Web Page
Use
this
link