Grass Valley 8964DEC v.1.0.5 - Manual (Page 46)

46 8964DEC/-FS Instruction Manual
Configuration
To load a saved E-MEM from a location
1. Select the Load from ... button.
2. This will bring up the Load E-MEM web page ( Figure 24 ).
3. Browse to the location of the file you wish to load and select the file then
the
Open button to load the file or enter the filename and path in the
Enter filename box.
4. Once the correct path and filename is loaded, select the Load button on
the Load E-MEM page.
5. This should place the recalled E-MEM file into the corresponding
E-MEM window. Select the corresponding
Recall button to invoke this
configuration.
Figure 24. Load E-MEM Web Page