Grass Valley 8964DEC v.1.0.5 - Manual (Page 51)

8964DEC/-FS Instruction Manual 51
Module Option Upgrade
Newton Control Panel Configuration
A Newton Control Panel can be interfaced to the Gecko 8900 Series frame
over the local network to control 8964DEC configuration and control
parameters.
Note The 8900NET module in the Gecko 8900 frame must be running software
version 3.2.0 or later for proper operation of the Newton Control Panel.
Not all parameter controls are available with the Newton Control Panel.
The available control panel controls are listed in
Table 5 on page 18 . An
example of the Newton Configurator for the 8964DEC is shown in
Figure 28 .
Figure 28. Newton Configurator Example
Refer to the documentation that accompanies the Newton Control Panel for
installation, configuration, and operation information.
Module Option Upgrade
The 8964DEC module can be upgraded to enable the Frame Sync option.
This upgrade must currently be done at the factory. Contact your nearest
Grass Valley Sales or Service representative for more information.