Grass Valley Aurora Playout v.6.5 - Manual (Page 35)

4. At the Select Components screen, check the boxes for the component(s) you want
to install.
5. Click Next to start the installation.
6. Click Finish at the Installation Complete screen.
7. Configure each component:
Installing the Assignment List Plug-in
The Assignment List Plug-in should be installed on each NCS computer that needs to
access it.
You can install this plug-in on each computer using the installation CD, or you can create a
network installation from which you can install the plug-in on multiple computers using the
same configuration file.
Installing ALP using the installer
If you are installing the Assignment List Plug-in on a small number of computers, the
easiest way to install it is to use the installation CD.
1. Insert the Aurora Playout CD into the CD-ROM drive.
2. Navigate to the CD and double-click SetupAuroraPlayout.exe .
3. Click Next until you reach the Select Components screen.
19 November 2008 Aurora Playout User Guide 35
Installing Aurora Playout