Grass Valley Aurora Playout v.6.5 - Manual (Page 57)

Description Options Setting
Thin;
Small
Select the color to display on the RDU during normal
operation. Red;
Green;
Amber Normal
Color
Select the color to display on the RDU to indicate a
GPI On-Air trigger. Red;
Green;
Amber On-Air Color
Select the color to display on an external tally device
to indicate an input trigger. Red;
Green;
Amber External
Color
Select the color to display on the RDU to indicate that
both the GPI On-Air and Tally Input are triggered. Red;
Green;
Amber On-Air and
External
Color
Enter the Display ID number for each channel on the
RDU. The Display ID determines the position of the
clip information on the RDU. Display ID (1-6) /
Resource ID Resource
The Tally Input determines the state of the channel,
and the color display associated with the current Tally Input (1-2) / Input
ID
channel state on the RDU. Typically, these settings
should be left at their default values. For more
information about tally states, please see the user
manual for your RDU.
Check the Size checkbox to display the clip name
with the full number of characters allowed. If Full is Display Size
checked, 19 characters can be displayed. If Full is not
checked, 13 characters can be displayed. (TSI-1000
only)
Check the Duration box to display the minute and
seconds. (TSI-1000 only) Duration
Setting Cue and Chain options
19 November 2008 Aurora Playout User Guide 57
Configuring Aurora Playout