Grass Valley 3-CCD CameraMan Rev.C - Manual (Page 50)

Chapter 4
44 CameraMan 3-CCD Presenter Camera System Installation and Operations
Automatic Setting
In this mode, CameraMan will automatically adjust
the Image (light & dark) for each camera view.
• Press the autoIMAGE button to enable auto-
matic operation of the CameraMan’s Image func-
tion.
The autoIMAGE can be stored in a Location Preset
or an autoTRACK View.
Focus Setting The Focus setting adjusts the lens for visual clarity
of the video picture.
To control the focus:
• Press the top FOCUS button to adjust the lens
for objects closer to the camera.
• Press the bottom FOCUS button to adjust the
lens for objects farther from the camera.
Zoom Perspective
To control the zoom:
• Press the Zoom IN button for the camera to
zoom in for a tighter view.
• Press the Zoom OUT button for the camera to
zoom out for a wider view.
The Zoom can be adjusted manually and can be
stored in a Location Preset or an autoTRACK View.
Controlling the Camera Setup Mode
The Camera Setup Mode buttons (with green text)
on your keypad allow you to adjust the camera’s set-
tings via four on-screen menus. These adjustments
should be made by qualified technical personnel
only.
Important Note: If your system includes a Camera-
Man SHOT Director, make these adjustments only
with the SHOT Director. Do not use the keypad.