Grass Valley 3-CCD CameraMan Rev.C - Manual (Page 55)

CameraMan 3-CCD Presenter Camera System Installation and Operations Manual 49
A
PPENDIX
B
Troubleshooting
Should you have any problems with your Camera-
Man Presenter Camera System, please refer to the
following guide. After referring to the guide, should
you still have questions, please contact your autho-
rized Grass Valley reseller, or call Grass Valley Sup-
port direct.
Problem
The CameraMan autoTRACK Camera will not fol-
low the Tracking Ring Package.
Solution
1. Is the POWER LED on the CameraMan’s front
panel illuminated?
• If it is illuminated, proceed to step #2.
• If it is not illuminated, make sure the Main
Docking Station is plugged in and its
POWER switch located on the front panel
is moved to the ON position. The POWER
LED on the front of the Main Docking
Station should be illuminated.
2. Is the TRACKING UNIT STATUS LED on the
camera’s front panel illuminated?
• If it is ON, proceed to step #3.
• If it is OFF, make sure the Tracking Ring
Power Pack is powered ON.
• If it is still OFF, check the Battery LOW
LED on the top of the Tracking Ring Power
Pack. If the Battery LOW LED is
illuminated, then the battery is low and
needs to be recharged.
• If both the ON LED and the LOW LED on
the top of the Power Pack are not
illuminated, then the battery may be
completely discharged and needs to be
fully recharged.