Grass Valley Ignite SDC - Manual (Page 104)

104 Ignite SDC/HDC Robotic Camera Instruction Manual
Appendix C — HD Camera Block
2. Finely adjust the synchronizing signal input and video signal output
phases by H PHASE-FINE.
When using SD synchronizing signals:
1. Roughly adjust the synchronizing signal input and video signal output
phases by SDHD PHASE-CRS (coarse).
2. Finely adjust the synchronizing signal input and video signal output
phases by SD-HD PHASE-FINE. If the adjustment performed using
SD-HD PHASE is not satisfactory, use H PHASE-COARSE/FINE.