Grass Valley Ignite SDC - Manual (Page 27)

Ignite SDC/HDC Robotic Camera Instruction Manual 27
Installation Procedures
Prompter Adapter Plate (Optional)
Note The prompter assembly is supported by a mounting plate that sits beneath
the camera assembly.
1. Attach camera adapter plate to prompter adapter plate ( Figure 8 ).
Figure 8. Prompter and Camera Adapter Plates
2. Attach the main body of the prompter adapter plate to the robotic pan/
tilt head assembly L-bracket so that the T-bolt end of the two rods
attached to the mounting plate extend to the front of the robotic pan/
tilt head assembly.
Mounting
plate
rods
Prompter
adapter
plate
Camera
adapter
plate
Front
8492_08_r0