Grass Valley JEP-100 v.1.2.0 - Manual (Page 70)

68 JEP-100 — Installation and Operating Manual
Section 1 — JEP-100 Control Panel
Diag - Diagnostic Mode
Provides a test of the LED character set and all button lamps. Exit with
TAKE or CLEAR.
Note Buttons 65, 73, and 81 may not light while in Diagnostics mode. This is a
diagnostics code problem and does not affect the function of the panel.
C.B. - Change Brightness
Changes brightness of LEDs in display windows.
When "C.B. ?" is displayed, press TAKE; then use UP/DOWN to se lect the
desired brightness level. Exit with TAKE or CLEAR.