Grass Valley KALEIDO-IP X300 v.7.80 - Manual (Page 32)

20
Setting Up the Kaleido-IP
System Setup
Opening XEdit in Online Mode
To open XEdit in online mode
1 From a workstation on the same subnet as the multiviewer, open a Web browser
window and enter the management IP address of your Kaleido-IP multiviewer in the
address bar.
The Kaleido-X home page appears.
2 Click the XEdit button.
3 When prompted to specify a database, choose one from the Path list, or click Browse to
specify another location, and then click OK to continue.
The main application window appears.
4 On the Configure menu, click Connect.
5 In Connect to Multiviewer, Enter the management IP address for the Kaleido-IP you
wish to configure, and then click OK.
The selected system’s hierarchical list appears in the main pane, showing the
multiviewer type, system name and IP address, and the status bar shows the
connection status.
Configuring Transport Streams
The default configuration for a Kaleido-IP system includes eight predefined any-source
multicast (ASM) streams, under NETWORK ADAPTER 2. Before you can use these streams,
you must adjust their settings to match the actual transport streams you wish to monitor.
Depending on your monitoring purposes and Kaleido-IP model, you may also need to add
transport streams, including other types of transport streams (see
Adding Stream Sources ,
on page 22).
Modifying the Set of Predefined Streams
To modify settings for a multicast transport stream
1 In the main window, click the System tab, and then click Description/Calibrations on
the second level tab bar.
2 Expand the System hierarchical list, and then navigate to the multicast transport
stream you wish to configure, under NETWORK ADAPTER 2.